The measurement chain is built to your acceptance standard
Force, pressure, leak rate, dimensional, electrical—each parameter is engineered into the machine's measurement chain from the specification stage. Pass/fail logic and data output follow your acceptance criteria, not a generic software stack.
What we build the machine to measure
Force & Pressure
Dimensional & Leak Rate
Electrical Functional
Air-gauging, CMM-integrated fixture stations, and differential pressure leak tests. Measurement chain calibrated to the tolerance band in your drawing, with automatic pass/fail output.
Tensile, compressive, burst, and proof-pressure tests. Load cell and transducer selection matched to your force range and resolution requirement—not a pre-configured capacity.
Continuity, insulation resistance, hi-pot, and functional load tests. Test sequence and result logging structured to your QA format—CSV, SPC feed, or print ticket.
Completed machines, available for review
Test reports, measurement chain diagrams, and acceptance records from prior builds are available before you commit. Shown below: four machines delivered to active production lines.
4-Station Leak Test Rig
Seal Press-Fit Force Tester
Harness Continuity Tester
Rotary Air-Gauging Cell
0–5 kN range, ±0.5 N resolution. Force-displacement curve logged per part. Pharmaceutical sealing application.
128-point simultaneous continuity check. Test cycle under 3 s. Results exported to SPC feed. Automotive wiring application.
Differential pressure method. Cycle time 18 s. Reject rate logged per shift. Automotive coolant housing application.
4-station rotary index. Bore and OD measured simultaneously. Tolerance: ±2 µm. Precision bearing component application.
Send us the spec. We'll build to it.
Describe your component, your pass/fail criteria, and your cycle time target. We'll assess feasibility and return a measurement chain outline—before any commitment.